Outlaw 1.5 Way

Omega Speaker Systems

Omega15wayrealebony
  • Omega15wayrealebony
  • Outlaw 1.5 Way
  • $0.00
Here is a true one and a half way speaker incorporating Omega Synergy Drive. The advantages are obvious:

  1. Still a single point source
  2. Double the the driver area
  3. Higher efficiency
  4. Lower impedance


A while back I built this project. The speaker was designed to use two full range drivers. My intent was to use two of the same full range drivers. I could use them in a bipolar multipoint format, but did this before. I wanted to use both and not run both full range.

Using two of the same drivers has advantages as they share the workload and will be more sensitive running at 4 ohm. Running both drivers full range would not be too accurate on the front baffle and would ruin my perfect point source. I decided to run the top driver full range and the bottom driver to 300Hz. All I needed to do is add a high quality air core coil for the bottom speaker.

The transition of the drivers is spot on because they are the same and matched. Both drivers share bass and mid bass duty and the speaker system is still a point source in the mids to treble.
This speaker is a true one and a half way.

 

Outlaw 1.5 Way Specifications

Cabinet: Top of the line with 'R' compound internal dampening and Cardas patented binding posts
Sensitivity:
95 dB at 4 ohms
Impedance:
4 ohms
Driver:
Proprietary RS5 ferrite magnet
Frequency Response:
45-20kHz (in room response to 40Hz)
Dimensions:
20"H x 10"W x 13.5"D
Weight:
40 lbs. each
Power Requirements:
as little as 2 watts
Crossover: None, Air coil for law frequency driver

instagram close apple-pay diners-club

Success! Feel free to continue shopping or head to your cart .

c